OSCam Cache Exchange Mode 3 Configuration

oscam.server

cacheex_maxhop = 2
Send your local card cache and cache from other cacheex peers, set to 1 if you want to send only cache from your local cards.

group = 1,10
send only cache from group 1 (local cards) and 10 (cache from cacheex users, see oscam.user).

caid = 1702,1843,183D
only send cache with these caids


cacheex_maxhop = 2
Send your local card cache and cache from other cacheex peers, set to 1 if you want to send only cache from your local cards.

group = 1,10
send only cache from group 1 (local cards) and 10 (cache from cacheex users, see oscam.user).

caid = 1702,1843,183D
only send cache with these caids



oscam.user

cacheex_maxhop = 2
Recive cache from peers local cards and hop2, set it to 1 if you only want cache from peers local cards.

cccmaxhops = -1
Don’t send list of local cards.

group = 10
You can put all cacheex user’s cache in one group. You don’t need to have separate groups.

caid = 1702,1843,183D
Only accept cw’s for these caids


cacheex_maxhop = 2
Recive cache from peers local cards and hop2, set it to 1 if you only want cache from peers local cards.

cccmaxhops = -1
Don’t send list of local cards.

group = 10
You can put all cacheex user’s cache in one group. You don’t need to have separate groups.

caid = 1702,1843,183D
Only accept cw’s for these caids

oscam.conf

wait_time = 1702:850
You can add a dynamic wait time for each caid since oscam rev 6142 (dynamic wait time means, wait only if the cw for the service on the previous request was in cache), in this example if cache for caid 1702 is smaller than 850ms, the request doesn’t go to your local reader. The disadvantage is that all request on local card incrase for 850ms (if cw on previous request was not in cache). Dynamic wait time should be calculated as follow: realtime on card+(50ms * cacheex_maxhop), in this example 1702 card is responding ~ with 650ms and we are using cacheex_maxhop = 2 in our configs, so wait_time should be 850